15 NOSTALGIC USES FOR MURPHY’S OIL SOAP YOU NEED TO TRY

 

 

Is it possible for a soap to be oil base? Most certainly, Murphy’s Oil Soap is an oil-based soap. This magnificent soap goes back to 1910 where it was invented by a German Immigrant.

 

 

The oil in Murphy’s Oil Soap is vegetable oil combine with potassium. These two ingredients are what make this oil soap such an amazing household product.

 

 

As you can see, this ancient soap is still one of the number one cleaning products on the market to this very day.

 

 

Its uses must be incredible for it to stick around for all this time. Are you anxious to see why? Here are 15 nostalgic Murphy’s Oil Soap household uses and tips you just have to see.

 

 

 

1.CLEANING TILES

 

 

 

Cleaning your tiled floor is quite simple when you use Murphy’s oil soap. Simply fill a bucket with warm water.

 

 

The amount of water is based on the size floor you’re cleaning. For precise measurement, it should be 1/4 cup of the oil soap to a gallon of warm water.

 

 

Combine the two well. Use a mop or a rag to clean the floor. I recommend repeating the processing using a clean mop or rag for spectacular results.

 

 

Allow the floor to dry properly before using. You will love the way your floor looks in the end.

 

 

 

2. CLEANING WOODEN FURNITURE

 

CLEANING WOODEN FURNITURE
HOW TO CLEAN WOODEN FURNITURE WITH MURPHY’S OIL SOAP TO REMOVE DUST AND GREASE

 

Regular use of wooden furniture can take a toll on them. When your wooden furniture is covered with dust and grease there’s only one safe way to clean it. Combine a mixture of water and oil soap.

 

 

Use a cleaning cloth to wipe the surfaces. This will remove build-up dirt and grime while leaving a glow. Find out more about cleaning wooden furniture here.

 

 

 

3.CLEANING WOODEN CABINETS

 

 

To clean your greasy wooden cabinets, you’ll need a small bucket, two cleaning cloths, a soft toothbrush, and a bottle of Murphy’s Oil Soap.

 

 

Apply the undiluted soap directly to the cabinet. Wiping it all over the surfaces. Allow sitting for 10 minutes to loosen the grime and grease. 

 

 

Proceed by filling the bucket with warm water. Wet the (soft) toothbrush in the water and brush the crevices that are hard to reach. When you’re through getting all the hard to reach areas.

 

 

Wet the cloth in the water and wipe the cabinets removing the loose residue. To continue, pour out the dirty water and use fresh warm water with the clean rag to give it its final wipe.

 

 

 

4.CLEANING WOODEN FLOORS

 

 

The best and safest product you could ever choose to clean your wooden floors with is no other but MURPHY’S OIL SOAP.

 

 

The soapy ingredient operates as a grease, dirt, and grime remover while the oil contributes to the appearance, making your floor glows. Sounds amazing!

 

 

This may sound like a huge task but actually, it’s as easy as 123. Simply grab hold of a bucket, fill the bucket with warm water.

 

 

Pour in 1/4 -1/2 cup of the oil soap and mix in. Sweep the floor thoroughly then wipe with a towel or a mop. Wipe a second time only this time without the oil soap.

 

 

 

5. CLEANING CARPETED FLOOR

 

HOW TO REMOVE CARPET STAINS WITH MURPHY'S OIL SOAP
REMOVING CARPET STAINS WITH MURPHY’S OIL SOAP

This is an amazing tip to clean carpeted floors that are stained. Using the oil soap on the stains will surprisingly lighten the stain. Simply pour Murphy’s Oil Soap directly onto the stained area.

 

 

Use a brush to brush the area. Allow soaking for 30 minutes. Wipe with a damp cloth to remove the soap. The stain should be gone and your carpet looking at its best.

 

 

 

6.CLEAN STAINLESS STEEL APPLIANCES

 

 

Cleaning your stainless steel appliances is something you want to think about carefully. Using the wrong product can cause rust and dullness.

 

 

That’s why cleaning your stainless steel appliances with Murphy’s Oil Soap is super awesome as it’s one of the most recommended cleaners on the market.

 

 

To clean your appliances, make a solution of Murphy’s oil soap and warm water. Use a cleaning cloth to wipe the appliance with the solution. Use another clean dry cloth to wipe for the finishing touch. You can be sure to have sparkling appliances in the end.

 

 

 

7.STOP CRACKS ON WOODEN FLOORS

 

 

Most times the cracks on a wooden floor is a result of moisture absorption. This can come from the climate or simply the product you’re using to clean the floor.

 

 

Your wooden floor can last for years if it is cleaned with the right products. One of these is Murphy’s Oil Soap. 

 

 

Using Murphy’s Oil Soap to clean cracked wooden floors will stop the cracks in their spot. The soap works as a barrier preventing moisture and liquid absorption. The best thing about this oil soap is your floor will look amazing when it’s cleaned with Murphy’s Oil Soap.

 

 

 

8.CLEAN PAINT BRUSHES

I am guilty of throwing away my paintbrushes whenever the bristles get too stiff. That’s not an economical thing to do. That was my method until I learned that Murphy’s Oil Soap could soften my paintbrushes. Hip hip hooray for me!

 

 

All you’ll need is warm water and Murphy’s Oil Soap. Pour 2-3 caps of the oil soap into a small container then place the bristle part of the brush in.

 

 

Allow this to sit for over-night then wash with dish soap and warm water in the morning. Tada! your brushes are clean and ready for painting again.

 

 

 

9.CLEANING JEWELRY

Going to the jewelers to get your jewelry cleaned can be costly. Cleaning your jewelry at home is pretty common these days.

 

 

One great way to get this done is to use Murphy’s Oil Soap. Yep, that’s quite a shock. Can one product be so versatile?

 

 

Make a combination of warm water and 2 teaspoons of oil soap. Allow the jewelry to soak for 15 minutes. Remove from the solution and brush with a soft toothbrush to remove dirt and other particles.

 

 

When you’re through brushing rinse with warm water only. Wow! your prized possessions will be beautiful.

 

 

 

10.CLEAN YOUR SINKS

 

 

You can use Murphy’s Oil Soap to clean sinks, laminated or wooden surfaces. Simply use directly on sinks when cleaning.

 

 

To make it into a solution, combine 2 tablespoons of Murphy’s Oil Soap with 2 cups of warm water. Use this to clean sinks, faucets, wooden and laminated counters.

 

 

 

11.CLEANING LEATHER

 

 

You can use Murphy’s Oil Soap to enhance the appearance of leather. Great for cleaning even your leather jacket, sofas, and office chairs.

 

 

Simply apply the oil soap to anything that says leather. Gently wipe the oil soap on the leather as if you’re polishing a surface. This will enhance the colour and nourishes leather.

 

 

 

12. REMOVE STAINS ON CLOTHES

 

 

Murphy’s Oil Soap is wonderful for removing stains on clothes. With this amazing product, you can remove stains from your clothes with no thought of damaging the material.

 

 

Apply the soap directly to the stain, use a cloth to buff the area repeatedly. Inspect the area frequently while doing so to ensure the stain is fading.

 

 

Is there anything that this soap can’t do? It is advisable to read tags on clothing before applying any form of chemical.

 

 

 

13. BATHROOM ALL-PURPOSE CLEANER

If you’re searching for a bathroom cleaner, look no further. Murphy’s Oil Soap can do just that. Combine the oil soap with warm water in a spray bottle.

 

 

Use this to clean the floor, walls, counters, sinks, showers, and toilets. This will give your bathroom a natural finish with no toxic smell to endure.

 

 

 

14.RESTORE WOODEN CUTTING BOARDS

 

 

After washing and scrubbing your cutting board its seems somehow to lose its sheen. This is a result of vigorous scrubbing and acidic chemicals used to clean it.

 

 

After washing your cutting board here’s what to do to highlight its colour. Use undiluted Murphy’s Oil Soap to wipe the board. Doing this simple little thing will bring back its radiance.

 

 

 

15. REMOVES DIRT FROM BASEBALL PANTS

 

 

We all know how these pants get muddy after a match. Sometimes regular washing seems useless.

 

 

One way that you can get those dirt and mud-plastered pants back to their normal colour is by doing this. Fill a bucket with hot water, pour in 1/2 cup of the oil soap.

 

 

Place the pant into the solution turning it over instantly allowing total submersion. Allow soaking for over-night.

 

 

In the morning remove and wash with a regular laundry detergent. That’s how you wash baseball pants with Murphy’s Oil Soap. That’s Amazing, isn’t it?

 

 

We are glad you stopped by to find out more about this amazing product. We hope these Murphy’s Oil Soap tips were ones you could use, see you soon.

 

 

 

 

 

 

Leave a Reply

Your email address will not be published. Required fields are marked *