HOW TO REMOVE RUST FROM YOUR TOILET BOWL AND SHOWER

How to Remove Rust from Your Toilet Bowl and Shower

REMOVING RUST IN THE SHOWER
REMOVING RUST IN THE SHOWER

A sparkling clean toilet and shower are pleasant to the eye and, most importantly, your health. Regular and thorough cleaning gets a lot done; however, how do you remove rust from the toilet bowl? How to remove stains from shower walls?

 

How to remove rust from a shower rod, how to remove rust from the shower? All these questions will be comprehensively answered in this article.

 

Rust stains around the bathroom could be an eyesore, so we are here to give a hand. If you have attempted in the past to get rid of these stains but haven’t succeeded, you might even be convinced they are here to stay. Furthermore, it is essential to understand what causes rust in the bathroom.

 

WHAT CAUSES RUST IN THE BATHROOM

Getting rid of notorious rust from the toilet and shower can be a two-fold adventure.  After scrubbing and removing the rust stains, you need to determine the root of the problem. Contrary to these, the rust will keep coming back until the root cause is completely removed.

 

Rust is a result of dissolved iron [articles mixed with the oxygen from water. While iron is not a natural chemical composition of water, it is mainly found in lakes, rivers, and groundwater that serve as the primary water source used in your home.

 

As the dissolved iron lies around and accumulates with time, it can start to block the pipes, leaving rust and water stains. On the other hand, there may be rust in your home’s pipes that will result in the water having a strange orange-brown tint when coming out of the faucet.

 

Rust stains can be a trick to get rid of and might become permanent with time. Other possible causes include:

 

CHECK YOUR WATER SYSTEM

  • Plumbing system. A deteriorated or rusty water heater, pipes, or fixtures can cause rust particles in the water supply. This problem causes damage to your home and health concern that needs to be solved as soon as possible by a licensed and professional plumber. If the problem is from a rusty water heater or pipes, they need to be replaced.

 

  • Water supply. The water accessing your home has a significant amount of iron. The water might appear and even taste normal; however, in places where there is frequent standing water, for instance, the toilet bowl, rust might appear. One alternative is having your water tested or calling a professional, licensed plumber.

 

To make it easier washing your toilet frequently will prevent rust from building up. That will prevent the stress of treating the rust in the first place. 

 

How do you remove rust stains? Your success at getting rid of rust stains will depend on various factors, including the surface’s material(enamel, porcelain, or acrylic) and the duration that the discoloration has been in place. In the cases of severe staining, the color might have permanently attached itself to the porcelain, thus making it difficult or impossible to remove.

 

Before trying any of the techniques listed below, carry out a spot test in an inconspicuous part of the tub, toilet, or sink to prevent damage.

 

HERE ARE EFFECTIVE WAYS TO GET RID OF RUST STAINS 

 

  • Lemon and salt. Some people wonder how to remove rust stains from toilet bowls naturally. Well, this is one of the ways of naturally removing rust from the toilet bowl.

 

  • You can use either fresh or bottled lemon juice, add sufficient salt to make a wet paste, and use it on the affected area. While this method is perfect for flat surfaces, it can be successfully applied in a toilet bowl; however, the process might be challenging.

 

  • When applied, let the mixture sit for a few hours or overnight before scrubbing with a microfiber cloth or toothbrush and rinsing with clean water.

 

How to Remove Rust from Your Toilet Bowl and Shower

A sparkling clean toilet and shower are pleasant to the eye and, most importantly, your health. Regular and thorough cleaning gets a lot done; however, how do you remove rust from the toilet bowl? How to remove stains from shower walls?

 

How to remove rust from a shower rod, how to remove rust from the shower? All these questions will be comprehensively answered in this article. Rust stains around the bathroom could be an eyesore, so we are here to give a hand.

 

If you have attempted in the past to get rid of these stains but haven’t succeeded, you might even be convinced they are here to stay. Furthermore, it is essential to understand what causes rust in the bathroom. Getting rid of notorious rust from the toilet and shower can be a two-fold adventure.

 

 After scrubbing and removing the rust stains, you need to determine the root of the problem. Contrary to these, the rust will keep coming back until the root cause is completely removed.

 

Rust is a result of dissolved iron [articles mixed with the oxygen from water. While iron is not a natural chemical composition of water, it is mainly found in lakes, rivers, and groundwater that serve as the primary water source used in your home.

 

As the dissolved iron lies around and accumulates with time, it can start to block the pipes, leaving rust and water stains. On the other hand, there may be rust in your home’s pipes that will result in the water having a strange orange-brown tint when coming out of the faucet.

 

Rust stains can be a trick to get rid of and might become permanent with time. Other possible causes include:

 

  • Plumbing system. A deteriorated or rusty water heater, pipes, or fixtures can cause rust particles in the water supply. This problem causes damage to your home and health concern that needs to be solved as soon as possible by a licensed and professional plumber. If the problem is from a rusty water heater or pipes, they need to be replaced.

 

How do you remove rust stains? Your success at getting rid of rust stains will depend on various factors, including the surface’s material(enamel, porcelain, or acrylic) and the duration the discoloration has been in place.

 

In the cases of severe staining, the color might have permanently attached itself to the porcelain, thus making it difficult or impossible to remove. Before trying any of the techniques listed below, carry out a spot test in an inconspicuous part of the tub, toilet, or sink to prevent damage.

 

There are various options to get rid of rust stains, and they include:

 

  • Lemon and salt. Some people wonder how to remove rust stains from toilet bowls naturally. Well, this is one of the ways of naturally removing rust from the toilet bowl. You can use either fresh or bottled lemon juice, add sufficient salt to make a wet paste, and use it on the affected area.

 

  • While this method is perfect for flat surfaces, it can be successfully applied in a toilet bowl; however, the process might be challenging. When applied, let the mixture sit for a few hours or overnight before scrubbing with a microfiber cloth or toothbrush and rinsing with clean water.

 

  • Pumice stones.  A pumice stone or stick is an alternative for getting rid of rust stains from porcelain; however, it is advisable for fiberglass. Simply wet the stone and use enough elbow grease to rub away the stain efficiently.
  • As you keep working, the dampened stone will build a paste to help the cleaning process by lifting and eliminating the stain. When you finish scrubbing, rinse the place with clean water.

 

  • Baking soda. Make a thick and fine paste of water and baking soda and use it in the affected place. Leave the solution to stay overnight, scrub with a microfiber cloth or toothbrush, and then rinse with clean water.

 

  • Abrasive scouring pads. For the light stains, attempt scrubbing the place with the rough part of a sponge or a scouring pad that is slightly dampened.

 

  • Potato and dish soap. Cut the potato in half, dip the cut end into a baking soda or soap dish, and carefully scrub the stain. Periodically slice off the potato’s end for a more fresh surface and keep dipping into soap and scrub.

 

 What products in the market can be used to remove this type of rust?

 

Bar Keepers Friend

The Bar Keepers Friend guarantees the safe removal of rust stains and other mineral deposits from any metallic faucet finishes and toilet bowl. This comes in both liquid and powder forms and is an exceptionally efficient way of eliminating rust stains from your bathroom’s fixtures.

 

According to the manufacturer, it might be used to eliminate stains from sinks, shower basins, and bathtubs made of fiberglass, enameled cast iron, glass,  copper fiberglass, acrylic, ceramic, Corian, fireclay, porcelain, stainless steel, and solid-surface materials.

 

Shaw’s Pads.

Shaw’s Pads provides a chemical-free and septic tank-friendly method of removing rust. Combined with a very simple scouring cloth and handle, Shaw’s Pads function on the “ëlbow grease” principle. Simply wetting the pad and scrubbing the stains away.

 

Apply Shawá Pads to get rid of toilet rings: lime accumulation, calcium, and rust: brown, green, and greywater residue: chemical and algae stains on pool tiles: and hard water residues. Unlike the abrasive cleaners or pumice stone, Shaw’s Pads will not scratch your surface. However, they do need extra effort to get rid of notorious stains.

 

Pumice stick

The Pumice scouring stick works precisely effectively on eliminating rust stains from porcelain. Apply the Pumice stick when gently scouring away mineral deposits, such as rust and other stains, and scale from showers, tubs, toilets, and sinks.  

 

They can be applied when removing rust and unwanted paint from tile, piping, metalwork, masonry, and concrete too. These sticks are manufactured from a hundred percent natural pumice, a soft volcanic stone, safe for skin contact during application and storage around pets and children.

 

Zud Scouring Cleanser

Zud Scouring Cleanser dissolves hard water deposits, mineral stains, rust, and soap scum. This product uses oxalic acid and a powerful combination of abrasives made of finely ground pumice and quartz to combat rust stains immediately on contact.

 

Also, according to the manufacturer, it might be used to effectively clean stainless steel, pewter, iron, chromium, bronze, brass, and copper.

 

The Works Limeosol

The Works Limeosol is tested and authentic; it has been in the market for more than half a century. And, even though it has dangerous chemicals, it has been celebrated and loved by homeowners and even home service experts.

 

The main active element in this product is hydrochloric acid, which immediately eliminates mineral deposits, hard water stains, and rust from appliances, PVC, fiberglass, vinyl, siding, brick, cement, bathroom fixtures, and other materials upon contact_ there is no need for scrubbing.

 

The product is not recommended for application with septic systems because the chemical interferes with the natural breakdown of wastes.

 

Now that you have successfully eliminated rust stains from the surfaces of your bathroom, the following are tips on how to ensure they do not come back, keeping them away forever.

 

KEEPING THE RUST AWAY

  • Regular cleaning. Cleaning your bathroom at least once a week will ensure the surfaces are smooth, preventing the accumulation of iron and other deposits.

 

  • Keep items as dry as possible, wiping down bathroom surfaces that are subjected to water to lower iron residue accumulation. ( obviously, this is not applicable in the toilet).

 

  • Maintaining a keen eye on metals. Cans with metal bottoms, for instance, shaving cream and air fresheners, can significantly contribute to rust stains on your bathroom surfaces. Ensure you store them in a cabinet or cupboard, not on the sink or bath ledges.

 

  • Adding water softener or an iron filter. Water filters and efficient purification systems can remove the issue at the root or source, eliminating mineral deposits such as iron in water to prevent any possible rust stains in the future. ( some softener salts are actually designed to exclusively and specifically combat rust.)

 

  • Improve your plumbing. In older homes with iron pipes, iron accumulation might continue to form because of a pipe breakdown until the old pipes are replaced.

 

  • Baking soda. Make a thick and fine paste of water and baking soda and use it in the affected place. Leave the solution to stay overnight, scrub with a microfiber cloth or toothbrush, and then rinse with clean water.

 

  • Abrasive scouring pads. For the light stains, attempt scrubbing the place with the rough part of a sponge or a scouring pad that is slightly dampened.

 

  • Potato and dish soap. Cut the potato in half, dip the cut end into a baking soda or soap dish, and carefully scrub the stain. Periodically slice off the potato’s end for a more fresh surface and keep dipping into soap and scrub.

 

What products in the market can be used to remove this type of rust?

 

Bar Keepers Friend

The Bar Keepers Friend guarantees the safe removal of rust stains and other mineral deposits from any metallic faucet finishes and toilet bowl. This comes in both liquid and powder forms and is an exceptionally efficient way of eliminating rust stains from your bathroom’s fixtures.

 

According to the manufacturer, it might be used to eliminate stains from sinks, shower basins, and bathtubs made of fiberglass, enameled cast iron, glass,  copper fiberglass, acrylic, ceramic, Corian, fireclay, porcelain, stainless steel, and solid-surface materials.

 

Shaw’s Pads.

Shaw’s Pads provides a chemical-free and septic tank-friendly method of removing rust. Combined with a very simple scouring cloth and handle, Shaw’s Pads function on the “ëlbow grease” principle. Simply wetting the pad and scrubbing the stains away.

 

Apply Shawá Pads to get rid of toilet rings: lime accumulation, calcium, and rust: brown, green, and greywater residue: chemical and algae stains on pool tiles: and hard water residues. Unlike the abrasive cleaners or pumice stone, Shaw’s Pads will not scratch your surface. However, they do need extra effort to get rid of notorious stains.

 

Pumice stick

The Pumice scouring stick works precisely effectively on eliminating rust stains from porcelain. Apply the Pumice stick when gently scouring away mineral deposits, such as rust and other stains, and scale from showers, tubs, toilets, and sinks.  They can be applied when removing rust and unwanted paint from tile, piping, metalwork, masonry, and concrete too.

 

These sticks are manufactured from a hundred percent natural pumice, a soft volcanic stone, safe for skin contact during application and storage around pets and children.

 

Zud Scouring Cleanser

Zud Scouring Cleanser dissolves hard water deposits, mineral stains, rust, and soap scum. This product uses oxalic acid and a powerful combination of abrasives made of finely ground pumice and quartz to combat rust stains immediately on contact. Also, according to the manufacturer, it might be used to effectively clean stainless steel, pewter, iron, chromium, bronze, brass, and copper.

 

The Works Limeosol

The Works Limeosol is tested and authentic; it has been in the market for more than half a century. And, even though it has dangerous chemicals, it has been celebrated and loved by homeowners and even home service experts.

 

The main active element in this product is hydrochloric acid, which immediately eliminates mineral deposits, hard water stains, and rust from appliances, PVC, fiberglass, vinyl, siding, brick, cement, bathroom fixtures, and other materials upon contact_ there is no need for scrubbing.

 

The product is not recommended for application with septic systems because the chemical interferes with the natural breakdown of wastes.

 

KEEPING RUST AWAY FROM BATHROOM SURFACES

Now that you have successfully eliminated rust stains from the surfaces of your bathroom, the following are tips on how to ensure they do not come back, keeping them away forever.

 

  • Regular cleaning. Cleaning your bathroom at least once a week will ensure the surfaces are smooth, preventing the accumulation of iron and other deposits.

 

  • Keep items as dry as possible, wiping down bathroom surfaces that are subjected to water to lower iron residue accumulation. ( obviously, this is not applicable in the toilet).

 

  • Maintaining a keen eye on metals. Cans with metal bottoms, for instance, shaving cream and air fresheners, can significantly contribute to rust stains on your bathroom surfaces. Ensure you store them in a cabinet or cupboard, not on the sink or bath ledges.

 

  • Adding water softener or an iron filter. Water filters and efficient purification systems can remove the issue at the root or source, eliminating mineral deposits such as iron in water to prevent any possible rust stains in the future. ( some softener salts are actually designed to exclusively and specifically combat rust.)

 

  • Improve your plumbing. In older homes with iron pipes, iron accumulation might continue to form because of a pipe breakdown until the old pipes are replaced.

 

As you see rust in the toilet bowl and shower is clearly treatable and removable all you need is the right product and time. With these, your toilet bowl or your shower will never see the presence of rust again. We hope you found what you were searching for in this article. Thank you for stopping by see you soon.

 

Leave a Reply

Your email address will not be published. Required fields are marked *